User Controls:
Balanced/Unbalanced Input Select
Rear Mounted Power Switch
Earth Isolation Switch
1 Unbalanced Input (RCA)
1 Balanced Input (XLR)
2 pairs Speaker Binding Posts
2 Remote Trigger Inputs (5VDC)

Features:
The "750"/"750P" incorporates a massive custom designed, toroidal power transformer, employing unusually heavy gauge wire that reduces copper losses to a minimum. An electrostatic shield prevents AC line borne interference from entering the signal path.

The bi-polar transistors used in the "750"/"750P" are run in Class A mode. This avoids the crossover notch distortion and the resulting odd-order harmonics present, to some degree, in all other classes of operation. The devices used in the "750"/"750P" output stage are MOSFETs, which with high quiescent current circuitry, are run in the equivalent of Class A to 10 watts. Beyond this point the output class is technically Class AB

Multiple Protection Systems
The "750"/"750P" incorporates a full range of protection circuits, isolated from all signal carrying circuits via opto-couplers.

Soft Start
The "750"/"750P" utilises soft start circuitry to protect the fuses and/or circuit breakers in your home’s mains power supply.

Specifications:
Continuous Power Ouput (per channel): 750Wrms into 8Ω
1300Wrms into 4Ω
Total Harmonic Distortion (THD+N):
Typically 0.008% @ 1kHz into 8Ω
20Hz to 20kHz <0.04% into 8Ω
Frequency Response: 20Hz to 25kHz, ±0.25dB
Hum & Noise (unweighted): -100dB, referenced to rated output
Dynamic Headroom (rated with music): >1.1dB
Maximum Current Output: 160A
Damping Factor: >700 @ 1kHz into 8Ω
Input Impedance:
Unbalanced 22kΩ
Balanced 3.3kΩ
Input Sensitivity:
Unbalanced 1.50Vrms
Balanced ±0.77Vrms
Dimensions (Width x Height x Depth): 482mm x 176mm x 460mm
Weight: 31.0kg/piece


Pris: 47.000kr/stk
Innbytte kan taes.

(Alle priser inkl. mva)